Vsticking VK530 TC Box Mod with YiHi SX530 Chip 200W

[vapeciga]

We all know that the atomizer is an important part of the electronic cigarette, is the carrier of the smoke oil, is the old electronic cigarette "smoke" part of the improvement and upgrade products, through the support of the electronic cigarette output equipment on the smoke oil heating atomization, smoke. But it is hard to avoid to encounter the atomizer in life fast heating or even appear hot mouth, what is the cause of the heat of the electronic cigarette atomizer? How to solve it? The following Chinese cigarette network xiaobian for you to sort out the common atomizer heat causes and solutions.

Causes and solutions of heating in atomizer:
What is the cause of the fever of e-cigarette atomizer
When choosing a nebulizer, you can choose the appropriate heating wire or the fancier coil according to the player's recommendation. Choosing the right coil also ensures that the nebulizer can give full play to its due taste and performance, and at the same time fundamentally ensures the normal heat and heat dissipation of the nebulizer. Today, I will give you more attention to the atomizer to sort out, I hope to give our friends some help:

1. The limitation of atomizer structure is ignored.
What is the cause of the fever of e-cigarette atomizer
The structure and size of many kinds of atomizers are different, and the narrow atomization space of many atomizers cannot meet the air inlet and heat dissipation requirements of high-heat coils, or even the installation requirements of fancy coils. The high heat coil is heated in a small space, which can easily lead to the rapid accumulation and conduction of heat, and can even lead to the possibility of the coil directly burning the cotton.

Solution: judge the type of coil available based on the structure of the atomizer's electrode and the size of the atomizer's chamber. Don't assume that all atomizers can carry high-heat fancy coils.

2. The proper absorption gap is selected and the cooling demand is ignored.
What is the cause of the fever of e-cigarette atomizer
No matter what type of atomizer you use, the right amount of inhalation resistance can make the atomizer taste much better. However, when many atomizers are loaded with coil with large heat, too small air intake will lead to the heat dissipation of atomization chamber can not keep up. When the player understands that the air intake not only provides the air needed to atomize the core, but also takes on the cooling requirements of the coil, this problem is easy to deal with.
Solution: reasonably improve the air intake of atomizer, use a small air intake atomizer to choose the coil with less heat as far as possible.

3. Excessive output power is used for quick bursts.
What is the cause of the fever of e-cigarette atomizer
Quick bursts of ignition can result in a quick output of smoke. Many players set the output power higher in order to quickly light up the coil and produce smoke. This, however, allows the coil to continue to generate high heat during the output process after ignition, causing the atomizer to heat up faster.
Solution: appropriately reduce the output power, or choose to have the output power curve mode of the equipment, the output power of the coil after preheating a reasonable reduction.