Unlike many versions of upgrades, the NIXON atomizer introduced V1.0 and V1.5 versions at the same time. Fresh off the NIXON atomizer, it's hard to see why, because the top cap can't be opened by pulling it out, and the most confusing thing is that the air inlet can't be found at all.
The connection between the top cover of the NIXON atomizer and the main body is a threaded structure, and the thread between the two is a reverse fillet. In other words, by rotating the top cover of the atomizer clockwise, the top cover can be unscrewed from the main body. During the rotation, the intake openings hidden under the top cover also appear in view. In other words, through the rotation of the top cover, can achieve the effect of adjusting the size of the atomizer intake.
Both V1.0 and V1.5 are available in silver gray and black, with a sandblasting process, which is similar to the DDP atomizer with excellent hand feel and appearance. The difference between the two versions is the difference in the internal intake opening. Version 1.5 had a straight through large opening structure, while version 1.0 made more holes in this opening to reduce the intake and guide the intake.
The structure of the atomizer is very simple to disassemble. The parts of the atomizer can be completely separated by rotating the top cover clockwise and the oil bin counterclockwise. The screw column at the bottom of the atomizer and two rubber rings at the bottom of the electrode can prevent the leakage of smoke oil and condensate. The nozzles of the atomizer are made of POM insulating material, and the outer part is treated with waist reduction, which makes the bite feel excellent. The internal slope treatment can effectively block the condensate inlet.
The injection hole of the NIXON atomizer is located on the side of the electrode table, and the hole is small, which can only be used for the insertion and injection of the injector. In the face of the development of the oil at the bottom of the equipment popularization, NIXON atomizer is also equipped with a BF screws for the user to replace, on the one hand, when using the oil at the bottom of the equipment can solve the problem of oil is not convenient, NIXON atomizer at the same time also more than the bottom oil drops of oil atomizer a feature that is visual, oil on for oil control more convenient.
https://www.vapeciga.com/products/gas-m ... 3-5ml-22mm
Представленная на Форуме BelVaping информация предназначена только для совершеннолетних пользователей. Просматривая этот сайт, Вы подтверждаете, что достигли совершеннолетия в своей стране.