SMOK Mag 225W Kit Is A Pistol Grip Box Mod

[vapeciga]

Although gun-handle shaped mainframes have been around for a long time, most of them are mechanical or semi-mechanical,

There are fewer mainframes with power adjustment and generally higher prices.

SMOK designed and produced a smok mag 225w kit, and we all know that the new rate of SMOK is a little scary,

However, due to a certain continuity of product appearance and excessive quantity, there are few eye-catching products.

But this time the smok mag 225w kit completely abandoned the traditional look, with a new posture in front of the players. Without further ado, the review begins!

Package Contents:
1 x Mag Box Mod, 1 x TFV12 Prince Tank, 1 x V12 Prince-Q4 0.4ohm Quadruple Coil ( Pre-installed ), 1 x V12 Prince-T10 0.12ohm Decuple Coil, 1 x Extra Glass Tank, 1 x USB Cable, 1 x User Manual, 1 x Spare Part Pack, 1 x Screwdriver

At first, I thought the screwdriver was for the player to disassemble the console to show the performance and quality of the chip solution,

Until I can't open it and then consult the manufacturer, the screwdriver of smok mag 225w is for the player to tighten the screw when it loosens.

However, the top panel and the side fastening decorative plate can be removed, the internal work and materials can also be slightly looked at, 510 interface connection wire solder joint is firm.

Wire material solid, decorative board bottom is intimate installation of mesh cloth, while acting as pressure relief and cooling hole, but also played a role in isolating dust into.

There is no need to add to the stock, as the slightly sloping top plane makes the entire fuselage look like it's been cut off from a handgun.

However, in order for the atomizer to be perpendicular to the bottom plane, the 510 connector scratch-resistant disk appears to be tilted.

The diameter of the anti-scraping plate of the 510 interface is 24.5mm, and the height of the uplift is not evaluated. As long as the diameter of the atomizer is no more than 25mm, the paint on the top of the main engine will not be scratched.

At the rear of the top plane, there is also a depression that vividly mimicked the structure of the rear of the pistol

In addition to simple imitation, smok mag 225w also involves part of the ergonomic structure. When the mod is held loosely, the thumb can be pressed comfortably in the curved groove.