The Review of Think Vape Finder TC Box Mod

[vapeciga]

Since DNA250 chip was born, the market there have been many uses the chip of the mod, like DNA200 chip, DNA250 chip mod also depending on the battery is divided into two categories, with double 18650 the mod the supreme power of the battery only can reach 168 w and uses the RC battery and 18650 mod to be able to achieve the desired effect of the DNA250 chip 250 w.

Three 18650 batteries battery configuration scheme of mod seems to have fixed a maximum compression volume of triangle layout, means that the shape of the fuselage of the immobilized, and manufacturers also can only in shape design, Think Vape released in late 2016 the Finder discoverer 250 mod, is to use the triangle layout of the new mod, so that a new mod DNA chip can bring a surprise to us? Let's see.

Look at the package first. The packaging box of Think Vape Finder TC Box Mod adopts clamshell packaging similar to the jewelry box, with the classic red and black color matching. Only the gold LOGO of Think Vape is printed on the front, and there is no information on other parts. Open the cover, you can see the instruction manual and data cable clamped on the mod and the box of finder 250 placed in the sponge.

Here is the data of this mod from vapeciga:
Material: zinc alloy, stainless steel, paint process, leather cover plate
Specification: 89mm high, 40mm wide and 49mm long
Support power: watt 1-250w
Temperature range: 100 ° c to 300 ° c or 200°F to 600°F
Input voltage range: 9V to 12.6v

Output voltage range: 0.5V to 9.3V
Maximum output current: 55A
Atomizer support resistance: the lowest power mode Ω 0.1, 0.08 Ω temperature control mode
Liquid crystal backlight display
Temperature control support: NI, TI, SS three kinds of temperature control wire
USB interface can provide 2A fast balance charging mode and computer setting mode

Take out the mod, the overall appearance is similar to the lost vape trade box, but more efforts are made on the appearance level, and the idea of organizing the modeling is more scientific and technological. The whole mod is made of zinc alloy, and the battery cover on the back is designed to cover the metal body with real leather. The leather is patent leather, which feels good and is easy to clean. The bottom is printed with FINDER250 DESIGNED BY THINK VAPE and quality test standard. A mesh heat dissipation board is installed near the main panel to facilitate the heat dissipation of the motherboard.