GeekVape Zeus Nano 22mm Sub Ohm Tank/$42 KIZOKU Techmod 80W TC Box
Добавлено: 25 сен 2020, 06:56
GeekVape Zeus Nano 22mm Sub Ohm Tank Clearomizer
Features
510 threading connection
22mm overall diameter
Leak-proof top to bottom airflow
Flavor -Intensive mesh coils
Makes a good figure even on small battery mods
Starter friendly handling, DL and MTL design for direct and pulling from the mouth to the lung
Easy top refilling system
GeekVape B Series Coil 0.4ohm (25~33W)
GeekVape B Series Coil 0.6ohm (15~25W)
Capacity: 2.0ml (Spare tube glass 3.5ml)
KIZOKU Techmod 80W TC Box Mod 18650
Features
Single 18650 Battery(Not Included)
Wattage Range: 0-80W
Output Voltage: 3.2V-4.2V
Wide compatibility with most atomizers
0.91 inch screen
4 working modes(VV/VW/TC/Bypass)
Unique ergonomic design of 5 degree bevel
Multiple battery protections for safe vaping
0.001s instant fire speed
Three-Button Operation
2A fast charging with type-c port
Materials: Stainless Steel, Zinc Alloy
$14.9 Oumier Wasp Nano S Dual-Coil 25mm RDA w/BF Pin
Coupon Code:MAPWASPD
Slotted top cap airflow control
Squonkable BF 510 connection
Classic, Clean, Stylish:
The WASP NANO S RDA shares the same minimalist design, and incorporates improved build deck and bottom feed capabilities. It is a 25mm width RDA, which also measures in at a relatively 30mm in height, from the 510 pin to the stock drip tip.
Dual Coil Configuration:
The simple deck design gives plenty of options for coil installation-catering for dual builds with raised posts to enable the coil legs to be easily trimmed.
Multiple Airflow Options:
Airflow is made up of two big holes positioned near the middle of the WASP NANO S body air gets drawn through the holes and directed upward to the coil. The airflow control system has a huge range of adjustment so you can close it down to almost MTL restriction and open it up to pretty much wide-open airflow.
Deep Juice Well.
5mm capacity spacious juice well with perfect post placement allows for leak free convenient dripping access
ZQ MOOX Pod System Vape Starter Kit 3ml
Features
Material: Zinc alloy
Battery: Built-in 1100mAh
Output Wattage: 8W / 10W / 12W
Voltage: 3.3~4.2V
Output: 3-level switchable for 1.2ohm, full power for 0.6ohm
Charging: Micro USB port
Pod Capacity: 3.0ml
Coil Resistance: 0.6ohm mesh, 1.2ohm Ni-chrome (8~12W)
Pre-built 1100mAh battery, support re-charging via a micro USB port
Numerous protections, responsible for the safety and stability of the operation
3-level of the power-adjustable, easier to customize your vaping experience
3.0ml pod with a top filling design, manageable and leakproof
Top adjustable airflow system and bottom ventilation holes, conducive to cool the device into a tasty state
Features
510 threading connection
22mm overall diameter
Leak-proof top to bottom airflow
Flavor -Intensive mesh coils
Makes a good figure even on small battery mods
Starter friendly handling, DL and MTL design for direct and pulling from the mouth to the lung
Easy top refilling system
GeekVape B Series Coil 0.4ohm (25~33W)
GeekVape B Series Coil 0.6ohm (15~25W)
Capacity: 2.0ml (Spare tube glass 3.5ml)
KIZOKU Techmod 80W TC Box Mod 18650
Features
Single 18650 Battery(Not Included)
Wattage Range: 0-80W
Output Voltage: 3.2V-4.2V
Wide compatibility with most atomizers
0.91 inch screen
4 working modes(VV/VW/TC/Bypass)
Unique ergonomic design of 5 degree bevel
Multiple battery protections for safe vaping
0.001s instant fire speed
Three-Button Operation
2A fast charging with type-c port
Materials: Stainless Steel, Zinc Alloy
$14.9 Oumier Wasp Nano S Dual-Coil 25mm RDA w/BF Pin
Coupon Code:MAPWASPD
Slotted top cap airflow control
Squonkable BF 510 connection
Classic, Clean, Stylish:
The WASP NANO S RDA shares the same minimalist design, and incorporates improved build deck and bottom feed capabilities. It is a 25mm width RDA, which also measures in at a relatively 30mm in height, from the 510 pin to the stock drip tip.
Dual Coil Configuration:
The simple deck design gives plenty of options for coil installation-catering for dual builds with raised posts to enable the coil legs to be easily trimmed.
Multiple Airflow Options:
Airflow is made up of two big holes positioned near the middle of the WASP NANO S body air gets drawn through the holes and directed upward to the coil. The airflow control system has a huge range of adjustment so you can close it down to almost MTL restriction and open it up to pretty much wide-open airflow.
Deep Juice Well.
5mm capacity spacious juice well with perfect post placement allows for leak free convenient dripping access
ZQ MOOX Pod System Vape Starter Kit 3ml
Features
Material: Zinc alloy
Battery: Built-in 1100mAh
Output Wattage: 8W / 10W / 12W
Voltage: 3.3~4.2V
Output: 3-level switchable for 1.2ohm, full power for 0.6ohm
Charging: Micro USB port
Pod Capacity: 3.0ml
Coil Resistance: 0.6ohm mesh, 1.2ohm Ni-chrome (8~12W)
Pre-built 1100mAh battery, support re-charging via a micro USB port
Numerous protections, responsible for the safety and stability of the operation
3-level of the power-adjustable, easier to customize your vaping experience
3.0ml pod with a top filling design, manageable and leakproof
Top adjustable airflow system and bottom ventilation holes, conducive to cool the device into a tasty state