Geekvape Aegis Boost Vape Pod Mod Kit 1500mAh 40W 3.7ml
Добавлено: 26 дек 2019, 10:05
The three-proof technology of electronic devices has already appeared, especially the high-frequency devices used in daily use, such as mobile phones, cameras, tablets, computers, razors, etc., that have already had three-proof products.
As an e-cigarette user, the frequency of e-cigarette use can even be compared with the frequency of mobile phone use, e-cigarette tripod is an imperative research direction. Today I share a dust-proof, waterproof and shock-proof e-cigarette tripod Geekvape Aegis Boost Vape Pod Mod Kit.
Geek Vape's product packaging has always been thoughtful and has its own characteristics. AEGIS 'packaging is square carton packaging.
Front Geekvape Aegis Boost Vape Pod Mod Kit photo of the host, bottom notes that the package includes 26650 batteries while supporting 18650/26650 batteries.
Note on the back, product performance, characteristics, warning, security code, bar code, etc.
Packaging parameters:
1 AEGIS host machine (including one battery of 26650)
Spare apron, spare screw, 18650 battery sleeve, after-sale card, Chinese manual
What about the data line? Can't you upgrade and charge the system? This will be covered below.
The exterior design of AEGIS is beautiful and bright, especially the color of zinc alloy in the middle with bright eyes makes the exterior extremely bright. The handshake feels good and conforms to human mechanical engineering. The contact with the genuine leather of the palm increases the hand feel.
Specifications:
Brand: Geekvape
Model: Aegis Boost
Chipset: AS chip
Battery: Built-in 1500mAh
Output Power: 5 - 40W
Input Voltage: 3.0 - 4.25V
Output Voltage: 1.0 - 6.0V
Screen: 0.42inch OLED display
Functions: IP767 waterproof, shockproof and dustproof
Charging: Micro USB port
Charging Current: 5V/1.5A
Firing Speed: 0.08s
Pod Capacity: 3.7ml
Coil Resistance: 0.6ohm KA1 mesh coil(20-25W)
Material: Zinc alloy + leather + silicone
Product Size: 10.68 x 2.77 x 3.92cm
Package Size: 13 x 7 x 6cm
Product Weight: 0.185kg
Package Weight: 0.235kg
Package Contents:
1 x GeekVape Aegis Boost Pod Mod Kit, 1 x 0.6ohm KA1 Mesh Coil, 1 x USB Cable, 1 x User Manual
Built-in 26650 high-power battery, 3.7v, 4300MAH capacity, 35A output, strong output, and battery life as one.
Add the positive pole up to the battery and tighten the back cover. It is available with 18650 battery sleeve and 18650/26650 battery support.
Top battery cover, with handle, easy to open and close the cover, battery cover with thick rubber ring, waterproof necessary.
The two holes in the middle are not pressured relief holes, just for the sake of aesthetics. It is conceivable that if they are pressure relief holes, connecting the inside.
https://www.vapeciga.com/products/geekv ... tarter-kit
As an e-cigarette user, the frequency of e-cigarette use can even be compared with the frequency of mobile phone use, e-cigarette tripod is an imperative research direction. Today I share a dust-proof, waterproof and shock-proof e-cigarette tripod Geekvape Aegis Boost Vape Pod Mod Kit.
Geek Vape's product packaging has always been thoughtful and has its own characteristics. AEGIS 'packaging is square carton packaging.
Front Geekvape Aegis Boost Vape Pod Mod Kit photo of the host, bottom notes that the package includes 26650 batteries while supporting 18650/26650 batteries.
Note on the back, product performance, characteristics, warning, security code, bar code, etc.
Packaging parameters:
1 AEGIS host machine (including one battery of 26650)
Spare apron, spare screw, 18650 battery sleeve, after-sale card, Chinese manual
What about the data line? Can't you upgrade and charge the system? This will be covered below.
The exterior design of AEGIS is beautiful and bright, especially the color of zinc alloy in the middle with bright eyes makes the exterior extremely bright. The handshake feels good and conforms to human mechanical engineering. The contact with the genuine leather of the palm increases the hand feel.
Specifications:
Brand: Geekvape
Model: Aegis Boost
Chipset: AS chip
Battery: Built-in 1500mAh
Output Power: 5 - 40W
Input Voltage: 3.0 - 4.25V
Output Voltage: 1.0 - 6.0V
Screen: 0.42inch OLED display
Functions: IP767 waterproof, shockproof and dustproof
Charging: Micro USB port
Charging Current: 5V/1.5A
Firing Speed: 0.08s
Pod Capacity: 3.7ml
Coil Resistance: 0.6ohm KA1 mesh coil(20-25W)
Material: Zinc alloy + leather + silicone
Product Size: 10.68 x 2.77 x 3.92cm
Package Size: 13 x 7 x 6cm
Product Weight: 0.185kg
Package Weight: 0.235kg
Package Contents:
1 x GeekVape Aegis Boost Pod Mod Kit, 1 x 0.6ohm KA1 Mesh Coil, 1 x USB Cable, 1 x User Manual
Built-in 26650 high-power battery, 3.7v, 4300MAH capacity, 35A output, strong output, and battery life as one.
Add the positive pole up to the battery and tighten the back cover. It is available with 18650 battery sleeve and 18650/26650 battery support.
Top battery cover, with handle, easy to open and close the cover, battery cover with thick rubber ring, waterproof necessary.
The two holes in the middle are not pressured relief holes, just for the sake of aesthetics. It is conceivable that if they are pressure relief holes, connecting the inside.
https://www.vapeciga.com/products/geekv ... tarter-kit