Форум BelVaping

Hello everyone.
Do you miss me?
Yes,here we go again.This time we bring you a brief introduction of the YFTK SVA Kimech BF Squonk Mech Mod Clone.

YFTK SVA Kimech BF Squonk Mechanical Mod Clone $44.99
The YFTK Kimech mechanical mod Clone is made from Nylon and carbon fiber. It features a built in squonk bottle for bottom feeder, with capacity of 7ml. The mod is powered by one single 18650 battery.The mod is built in mosfet 3034


Buy it now at 3FVAPE>>>

YFTK Kimech mech mod clone is ready for you.



Main Features:
Nylon and carbon fiber construction;
510 threading connection;
Built-in 7ml bottom feeder bottle;
Powered by 1 x 18650 battery (not included);
Squonk friendly

Check more details on 3FVAPE>>>

Hello everyone.
This we present to you the YFTK Kimech mechanical mod clone unboxing video.

Check it out:
[bbvideo=560,315]https://youtu.be/3TTUeskSXgw[/bbvideo]

Hope this video do some help to you.

Order the Kimech mechanical mod now at 3FVAPE>>>

Hello everyone.
Good news!The YFTK SVA Kimech Mechanical Mod Clone is in stock now at 3FVAPE.
We can ship this item in 24hrs after payment confirmed on business day.

Real scene Photo:


By the way,the atomizer on the photo above is the Mulciber RDA Clone with BF Pin.
Main Features of the atomizer:
316 stainless steel construction;
510 threading connection;
Diameter: 22mm;
Two posts design for single or dual coil build;
Two airflow rings for airflow control;
Each airflow ring has two stacked slots for vertical or dual coil build and a single slot for more restricted airflow or single coil build;
Bottom feeder dripping capable;

Order the YFTK SVA Kimech Mech Mod Clone at 3FVAPE>>>

Hello everyone.
Good news!The YFTK SVA Kimech Mechanical Mod Clone - Blue is in stock now at 3FVAPE.
We can ship this item in 24hrs after payment confirmed on business day.

Real scene Photo:


By the way,the atomizer on the photo above is the YFTK Strike 18 RDA Clone.
Main Features of the atomizer:
Interchangeable Air Holes: 1.0mm / 1.1mm / 1.2mm / 1.3mm / 1.5mm;
Metal Components: AISI304 Stainless Steel;
Plastic Components: POM-C, PVC;
Insulators: Peek;
O-rings: NBR, IROH;
Diameter: 18mm

Order the YFTK SVA Kimech Mech Mod Clone at 3FVAPE>>>