Форум BelVaping

YFTK Karma RDA Clone - Silver $17.99 In Stock
The YFTK Karma RDA Clone is constructed from 316 stainless steel in 18mm diameter. The build deck has dual post for single coil build. The air accesses the chamber via bottom airhole and travels up to the bottom of the coil. The top cap is made of Delrin.
The RDA comes with bottom feeder pin and decorative ring.

Vandy Vape Phobia RDA - Black Original Price $35.99,Now Only $24.99
Please log in to see the lower price.

The original Vandy Vape Phobia RDA is a 24mm atty that features its unique base, which comes with dual post design, vertical coil installation, deep juice well and innovative bottom airflow redirecting inflow to the coils. It is optional to use 810 drip tip and custom 24mm chuff cap.
This RDA comes with bottom feeder pin.

Entheon RDA Clone Kit - Silver $12.69 In Stock
The Entheon RDA Rebuildable Dripping Atomizer is constructed from 316 stainless steel in 22mm diameter. The Innovative dual post style deck and coil clamping system makes coil building effortless. The airflow is adjustable by the two airslots on the side of cap.
This RDA comes with bottom feeder pin. 3 Spare Drip Tips and 1 PEI top cap are included in this kit.

YFTK Speed Up RDA Clone - Silver Original Price $14.99,Now Only $12.99
The YFTK Speed Up RDA Clone is constructed from 316 stainless steel in 18mm diameter. It features dual post build deck for single coil building. The juice well can hold much e-juice as it is very deep. The airflow is adjustable with single airslot on the cap. The POM 510 drip tip is heat resistant and can protect your mouth from heat.

This RDA is squonk-ready with bottom feeder pin, no standard pin included.

Digiflavor Wildfire Flavor Sub Ohm Tank - Silver Original Price $26.00,Now Only $12.99
The Original Digiflavor Wildfire Flavor Sub Ohm Tank, made of stainless steel in 22mm diameter, features innovative top airflow input system to avoid e-juice leakage and condensation. Furthermore, the bottom airflow output design offers user a pure and smooth flavor. The top refill design with 3ml juice capacity makes an easy way for your vaping experience!

Kindbright FL RTA Clone - Silver $14.99 In Stock
The Kindbright FL RTA Clone is constructed from 316 stainless steel in 24mm diameter. It features dual post deck for single coil and middle side adjustable airflow. The deck has notches for easy installation of the coil. The tank is large and allows to take about 30 puffs per drip.
This RTA comes with bottom feeder pin.

YFTK Karma RDA Clone - Silver $17.99 In Stock
The YFTK Karma RDA Clone is constructed from 316 stainless steel in 18mm diameter. The build deck has dual post for single coil build. The air accesses the chamber via bottom airhole and travels up to the bottom of the coil. The top cap is made of Delrin.
The RDA comes with bottom feeder pin and decorative ring.

Original Wismec Luxotic 100W Squonk Box Mod + Tobhino BF RDA Kit - Honeycomb Resin $47.99 In Stock
The Original Wismec Luxotic BF Kit consists of Luxotic BF Box Mod and Tobhino BF RDA.

Mod:
The Wismec Luxotic BF Box Mod, designed by JayBo, features its reimagined squonk system and inbuilt refillable e-liquid bottle of 7.5ml capacity. Powered by single 18650 battery (not included), Luxotic can reach maximum output to 100W. The large capacity squonk bottle allows you to vape with ease without refilling frequently. The cover panel is replaceable, making it different whenever you like.
RDA:
The Wismec Tobhino BF RDA is a 22mm atty that features open build place and adjustable side airflow. You can even build a fancy coil in this tiny RDA. It comes with decorative ring for not only decoration, but also heat insulation. With optional top cap, Tobhino is compatible with both 510 and 810 drip tips.

Original Vapefly Galaxies MTL RDA - Black Original Price $25.49,Now Only $18.99
Please log in to see the lower price.

The Original Vapefly Galaxies MTL RDA is the first precise airflow control MTL RDA. With six levels side airflow control and unique limitless screw airflow control in the deck, you will get unprecedented great vaping experience. The limit slot design makes it easier to remove atomizer from mod.

This RDA comes with BF pin adapter.

Vandy Vape Berserker MTL RDA Original Price $35.90,Now Only $26.99
Please log in to see the lower price.

The Original VandyVape Vandy Vape Berserker MTL RDA is an affordable high-end MTL RDA. It is 18mm in diameter. The deck comes with dual post for single coil build. The amazing thing is that Berserker MTL RDA has 6 different types of airflow accessories, which are replaceable and will bring you different flavor. The air enters from the side slots and finally blows the bottom of coil. What's more, the cap has 6 sizes of airholes, meaning there are lots of airflow configurations. Berserker MTL RDA comes with a 22mm and a 24mm beauty ring to fit different mods.
This RDA comes with bottom feeder pin.

Tesla CP Couples 220W Kit $58.99 In Stock
The Original Tesla CP Couples 220W Kit consists of CP Couples Mod and dual CP Couples RDTAs.

The Tesla CP Couples 220W Kit is an updated version of Biturbo kit. It allows you to enjoy two kinds of flavor on one device at the same time, and the output wattage for dual RDTAs can be adjusted separately. Powered by dual 18650 batteries (not included), the mod can deliver power up to 110W (single RDTA) / 220W (dual RDTA). This kit will definitely gives great fun for cloud chasers.

Rogue Purity Hybrid Mechanical Mod Clone - Matte Black $22.99 In Stock
The Rogue Purity Mechanical Mod Clone is constructed from brass in 24mm diameter. It is powered by 1 x 18650 battery (not included). It features 510 hybrid top cap and spring fire button.

GAS Mods G.R.1 GR1 RDA - Black Original Price $39.99,Now Only $35.00
Please log in to see the lower price.

The Original GAS Mods GR1 RDA is a 22mm atty that features single coil build deck, replaceable airflow control accessories and squonk-ready. The airflow control accessories comes with two different sizes of airholes, one is 2mm by 2mm each side, the other is 2mm by 5mm each side. The most recommended angle is 45 degrees, giving you the best flavor.

This RDA comes with bottom feeder pin.

Tower Mods Desolator Z Hybrid Mechanical Mod Clone + Axis RDA Clone Kit - Gold $18.99 In Stock
The mod kit consists of Tower Mods Desolator Z Mechanical Mod Clone and Axis RDA Clone.
Mod:
The Tower Mods Desolator Z Mechanical Mod Clone is constructed from brass with hybrid connection. The mod features artistic patterns almost on the whole tube, brass connection for better conductivity and magnetic fire button. The mod is powered by single 18650 battery (not included).
RDA:
The Axis RDA Clone is constructed from brass (cap) and stainless steel (base) in 24mm diameter. The build deck features triple post design, T shaped center post for easy building and 8mm deep juice well for juice storage. The airflow can be adjusted with multiple airflow configuration, from zero to maximum (5 holes open). Heat resistant Ultem wide bore drip tip is included.

SXK Haku Phenom RDA Clone - Silver Original Price $15.90,Now Only $12.99
Please log in to see the lower price.

The SXK Haku Phenom RDA Clone is constructed from 316 stainless steel in 22mm diameter. The deck comes with dual post design and much space for building. The juice well is deep enough to store some amount of e-juice. The airflow is adjustable with the angled airholes on the side of cap.
The RDA comes with bottom feeder pin.

Original GAS Mods Nixon V1.5 RDTA - Silver Original Price $24.99,Now Only $18.99
The Original GAS Mods Nixon V1.5 RDTA is a mini size RDTA and features invisible airslots. The airslots will appear once you rotate the top cap clockwise and the airflow can be adjusted in this way. The deck features dual post for single coil build. The refilling holes are near the post with very small size, but the RDTA also support squonking. The tank comes with 510 POM drip tip.

The RDTA comes with bottom feeder pin. Please Note: The RDTA supports airflow via screw up the top cap. And please be careful because the top cap is Reverse threading.

Original GeekVape Blade 235W TC Mod - Matte Black Original Price $53.90,Now Only $38.99
The GeekVape Blade Mod, which maximizes the use of dual 18650, 20700 and 21700 batteries (series, not included) and the maximum power can reach 235W, is a versatile device with high performance. Utilizing advanced aircraft grade material, it is very light and durable.

Original Digiflavor Themis RTA Dual Coil Version - Black Original Price $36.90,Now Only $25.99
Inspired by GeekVape Zeus, the Original Digiflavor Themis RTA is a leak-proof RTA with innovative airflow transferring from top to bottom providing outstanding flavor. Themis is available with two versions: Dual Coil Version and Mesh Version. The quick access top cap makes refilling easy. The tank is capable of holding 5ml e-juice.

This one is Dual Coil Version, with build deck for single & dual coil.

Kindbright Sherman RDA Clone - Black $18.99 In Stock
The Kindbright Sherman RDA Clone is constructed from 316 stainless steel in 25mm diameter. It comes with clamp style dual post build deck and redirected bottom airflow. The RDA is suitable for different types of fancy coils. The air accesses the tunnel via bottom airslots and travel up to the bottom of the coils, which provides smooth airflow and nice flavor.

Vapefly Galaxies MTL RDA - Black Original Price $25.49,Now Only $18.99
The Vapefly Galaxies MTL RDA is the first precise airflow control MTL RDA. With six levels side airflow control and unique limitless screw airflow control in the deck, you will get unprecedented great vaping experience. The limit slot design makes it easier to remove atomizer from mod.

This RDA comes with BF pin adapter.

Kindbright Flave RTA Clone - Silver $14.99 In Stock
The Kindbright Flave RTA Clone is constructed from 316 stainless steel in 24mm diameter. It features dual post deck for single coil and middle side adjustable airflow. The deck has notches for easy installation of the coil. The tank is large and allows to take about 30 puffs per drip.
This RTA comes with bottom feeder pin.

Original Soomook Hato K-One 238W TC VW Variable Wattage Box Mod - Black $47.99 In Stock
The Original Soomook Hato K-One Mod is a high end regulated device that is powered by ST chipset. With dual 18650 batteries (not included), the wattage can be varied from 5 to 238W. Hato K-One supports various modes, like power mode, temperature control mode, memory mode and bypass mode. The resistance range is 0.1 to 5ohm (VW), 0.06 to 1.3ohm (TC). The 510 connector is spring-loaded to match most atomizers in the market.

YFTK Karma DA Clone - Silver $17.99 In Stock
The YFTK Karma RDA Clone is constructed from 316 stainless steel in 18mm diameter. The build deck has dual post for single coil build. The air accesses the chamber via bottom airhole and travels up to the bottom of the coil. The top cap is made of Delrin.
The RDA comes with bottom feeder pin and decorative ring.

"Kindbright FL RTA Clone $14.99
The Kindbright FL RTA Clone is constructed from 316 stainless steel in 24mm diameter. It features dual post deck for single coil and middle side adjustable airflow. The deck has notches for easy installation of the coil. The tank is large and allows to take about 30 puffs per drip.
This RTA comes with bottom feeder pin. And it also has other colors to choose.
"
"YFTK Karma RDA Clone $17.99
The YFTK Karma RDA Clone is constructed from 316 stainless steel in 18mm diameter. The build deck has dual post for single coil build. The air accesses the chamber via bottom airhole and travels up to the bottom of the coil. The top cap is made of Delrin.
The RDA comes with bottom feeder pin and decorative ring. And it also has other colors to choose.
"
"Original Digiflavor Themis RTA $36.90
Inspired by GeekVape Zeus, the original Digiflavor Themis RTA is a leak-proof RTA with innovative airflow transferring from top to bottom providing outstanding flavor. Themis is available with two versions: Dual Coil Version and Mesh Version. The quick access top cap makes refilling easy. The tank is capable of holding 5ml e-juice.

This one is Dual Coil Version, with build deck for single & dual coil. And it also has other colors to choose.
"
"Original Vapefly Galaxies MTL RDA $25.49
The original Vapefly Galaxies MTL RDA is the first precise airflow control MTL RDA. With six levels side airflow control and unique limitless screw airflow control in the deck, you will get unprecedented great vaping experience. The limit slot design makes it easier to remove atomizer from mod.

This RDA comes with BF pin adapter. And it also has other colors to choose.
"

SXK NarDA RDA Clone - Silver Original Price $15.00,Now Only $12.99
The SXK NarDA RDA Clone is a rebuildable dripping atomizer with 22mm diameter. It is made out of 316 stainless steel. Coming with dual-post design, it is easy to build. SXK NarDA style RDA is a nice single coil RDA that will provide intense flavor and massive cloud. 510 POM drip tip is included.
This RDA comes with bottom feeder pin.

Tower Mods Desolator Z Hybrid Mechanical Mod Clone + Axis RDA Clone Kit - Gold $18.99 In Stock
The mod kit consists of Tower Mods Desolator Z Mechanical Mod Clone and Axis RDA Clone.
Mod:
The Tower Mods Desolator Z Mechanical Mod Clone is constructed from brass with hybrid connection. The mod features artistic patterns almost on the whole tube, brass connection for better conductivity and magnetic fire button. The mod is powered by single 18650 battery (not included).
RDA:
The Axis RDA Clone is constructed from brass (cap) and stainless steel (base) in 24mm diameter. The build deck features triple post design, T shaped center post for easy building and 8mm deep juice well for juice storage. The airflow can be adjusted with multiple airflow configuration, from zero to maximum (5 holes open). Heat resistant Ultem wide bore drip tip is included.

Original GAS Mods G.R.1 GR1 RDA - Black Original Price $39.99,Now Only $35.00
The Original GAS Mods GR1 RDA is a 22mm atty that features single coil build deck, replaceable airflow control accessories and squonk-ready. The airflow control accessories comes with two different sizes of airholes, one is 2mm by 2mm each side, the other is 2mm by 5mm each side. The most recommended angle is 45 degrees, giving you the best flavor.

This RDA comes with bottom feeder pin.

Vandy Vape Berserker MTL RDA - Silver Original Price $35.90,Now Only $25.99
The Authentic VandyVape Vandy Vape Berserker MTL RDA is an affordable high-end MTL RDA. It is 18mm in diameter. The deck comes with dual post for single coil build. The amazing thing is that Berserker MTL RDA has 6 different types of airflow accessories, which are replaceable and will bring you different flavor. The air enters from the side slots and finally blows the bottom of coil. What's more, the cap has 6 sizes of airholes, meaning there are lots of airflow configurations. Berserker MTL RDA comes with a 22mm and a 24mm beauty ring to fit different mods.
This RDA comes with bottom feeder pin.

Wismec Luxotic 100W Squonk Box Mod + Tobhino BF RDA Kit - Honeycomb Resin $47.99 In Stock
The Wismec Luxotic BF Kit consists of Luxotic BF Box Mod and Tobhino BF RDA.

Mod:
The Wismec Luxotic BF Box Mod, designed by JayBo, features its reimagined squonk system and inbuilt refillable e-liquid bottle of 7.5ml capacity. Powered by single 18650 battery (not included), Luxotic can reach maximum output to 100W. The large capacity squonk bottle allows you to vape with ease without refilling frequently. The cover panel is replaceable, making it different whenever you like.
RDA:
The Wismec Tobhino BF RDA is a 22mm atty that features open build place and adjustable side airflow. You can even build a fancy coil in this tiny RDA. It comes with decorative ring for not only decoration, but also heat insulation. With optional top cap, Tobhino is compatible with both 510 and 810 drip tips.

YFTK Short Cranked RDA Clone - Silver $18.99 In Stock
The YFTK Short Cranked RDA Clone is a 22mm RDA made from 316 stainless steel. The build deck is wide and has two terminals to build single coil. The airflow enters from the side air holes and hit the coil directly. The cap comes with triple-groove design.
This RDA comes with bottom feeder pin.
Please note: there is no drip tip included, the RDA is compatible with 510 drip tip.

Soomook Hato K-One 238W TC VW Box Mod - Black $47.99 In Stock
The Soomook Hato K-One Mod is a high end regulated device that is powered by ST chipset. With dual 18650 batteries (not included), the wattage can be varied from 5 to 238W. Hato K-One supports various modes, like power mode, temperature control mode, memory mode and bypass mode. The resistance range is 0.1 to 5ohm (VW), 0.06 to 1.3ohm (TC). The 510 connector is spring-loaded to match most atomizers in the market.

Original GAS Mods G.R.1 GR1 RDA - Black Original Price $39.99,Now Only $35.00
The Original GAS Mods GR1 RDA is a 22mm atty that features single coil build deck, replaceable airflow control accessories and squonk-ready. The airflow control accessories comes with two different sizes of airholes, one is 2mm by 2mm each side, the other is 2mm by 5mm each side. The most recommended angle is 45 degrees, giving you the best flavor.

This RDA comes with bottom feeder pin.

Original Vandy Vape Berserker MTL RDA - Silver Original Price $35.90,Now Only $25.99
The Original VandyVape Vandy Vape Berserker MTL RDA is an affordable high-end MTL RDA. It is 18mm in diameter. The deck comes with dual post for single coil build. The amazing thing is that Berserker MTL RDA has 6 different types of airflow accessories, which are replaceable and will bring you different flavor. The air enters from the side slots and finally blows the bottom of coil. What's more, the cap has 6 sizes of airholes, meaning there are lots of airflow configurations. Berserker MTL RDA comes with a 22mm and a 24mm beauty ring to fit different mods.
This RDA comes with bottom feeder pin.

SXK Haku Phenom RDA Clone - Silver Original Price $15.90,Now Only $12.99
The SXK Haku Phenom RDA Clone is constructed from 316 stainless steel in 22mm diameter. The deck comes with dual post design and much space for building. The juice well is deep enough to store some amount of e-juice. The airflow is adjustable with the angled airholes on the side of cap.
The RDA comes with bottom feeder pin.

Kindbright Sherman RDA Clone - Black $18.99
The Kindbright Sherman RDA Clone is constructed from 316 stainless steel in 25mm diameter. It comes with clamp style dual post build deck and redirected bottom airflow. The RDA is suitable for different types of fancy coils. The air accesses the tunnel via bottom airslots and travel up to the bottom of the coils, which provides smooth airflow and nice flavor.

SXK Armor 2.0 RDA Clone - Silver Original Price $17.90,Now Only $13.99
The SXK Armor 2.0 RDA Clone is constructed from 316 stainless steel and in 22mm diameter. It features dual-pole design and adjustable airflow. The RDA supports single and dual coil build with the insulated blocker. POM drip tip included.
This RDA comes with bottom feeder pin.

YFTK Karma RDA Clone - Silver $17.99 In Stock
The YFTK Karma RDA Clone is constructed from 316 stainless steel in 18mm diameter. The build deck has dual post for single coil build. The air accesses the chamber via bottom airhole and travels up to the bottom of the coil. The top cap is made of Delrin.
The RDA comes with bottom feeder pin and decorative ring.

GeekVape Blade 235W TC VW Box Mod - Crystal Sand Original Price $53.90,Now Only $38.99
The GeekVape Blade Mod, which maximizes the use of dual 18650, 20700 and 21700 batteries (series, not included) and the maximum power can reach 235W, is a versatile device with high performance. Utilizing advanced aircraft grade material, it is very light and durable.

Aspire Typhon 100 Mod - Green Original Price $45.00,Now Only $35.00
The Aspire Typhon 100 is a mod that is both compact and ergonomic. The curvy design makes the mod feel super comfortable in the palm of your hand. The Typhon 100 is powered by a 5000mAh internal battery, with maximum output wattage of 100W. That means less recharging is required and longer vape time. Typhon 100 supports various working mode, like VW / VV / Bypass / CPS / TCR. It can perfectly support 26mm tanks without overhang.

Vandy Vape Berserker MTL RDA - Silver Original Price $35.90,Now Only $25.99
The Authentic VandyVape Vandy Vape Berserker MTL RDA is an affordable high-end MTL RDA. It is 18mm in diameter. The deck comes with dual post for single coil build. The amazing thing is that Berserker MTL RDA has 6 different types of airflow accessories, which are replaceable and will bring you different flavor. The air enters from the side slots and finally blows the bottom of coil. What's more, the cap has 6 sizes of airholes, meaning there are lots of airflow configurations. Berserker MTL RDA comes with a 22mm and a 24mm beauty ring to fit different mods.
This RDA comes with bottom feeder pin.

Vapefly Galaxies MTL RDA - Black Original Price $25.49,Now Only $18.99
The authentic Vapefly Galaxies MTL RDA is the first precise airflow control MTL RDA. With six levels side airflow control and unique limitless screw airflow control in the deck, you will get unprecedented great vaping experience. The limit slot design makes it easier to remove atomizer from mod.

This RDA comes with BF pin adapter.

Ulton Adler Mikro RDA Clone - Silver $13.59 In Stock
The Ulton Adler Mikro RDA Clone is constructed from 316 stainless steel in 22mm diameter. The deck looks very neat as the post structure is simple. The RDA comes with top airflow system.
This RDA comes with bottom feeder pin.

YFTK Short Cranked RDA Clone - Silver $18.99 In Stock
The YFTK Short Cranked RDA Clone is a 22mm RDA made from 316 stainless steel. The build deck is wide and has two terminals to build single coil. The airflow enters from the side air holes and hit the coil directly. The cap comes with triple-groove design.
This RDA comes with bottom feeder pin.
Please note: there is no drip tip included, the RDA is compatible with 510 drip tip.

Vapefly Galaxies MTL RDA - Black Original Price $25.49,Now Only $18.99
The original Vapefly Galaxies MTL RDA is the first precise airflow control MTL RDA. With six levels side airflow control and unique limitless screw airflow control in the deck, you will get unprecedented great vaping experience. The limit slot design makes it easier to remove atomizer from mod.

This RDA comes with BF pin adapter.

Ulton Adler Mikro RDA Clone- Silver $13.59 In Stock
The Ulton Adler Mikro RDA Clone is constructed from 316 stainless steel in 22mm diameter. The deck looks very neat as the post structure is simple. The RDA comes with top airflow system.
This RDA comes with bottom feeder pin.

Wismec Luxotic 100W Squonk Box Mod - Honeycomb $32.99 In Stock
The Wismec Luxotic BF Box Mod, designed by JayBo, features its reimagined squonk system and inbuilt refillable e-liquid bottle of 7.5ml capacity. Powered by single 18650 battery (not included), Luxotic can reach maximum output to 100W. The large capacity squonk bottle allows you to vape with ease without refilling frequently. The cover panel is replaceable, making it different whenever you like.

Paradigm Modz Octarine V2 RDA - Black $14.99 In Stock
The original Paradigm Modz Octarine V2 RDA is a 22mm RDA that features dual post build deck and multiple airflow system. The cap has dual side airslots and signle bottom airslot on each side. The internal of the cap is domed for concentrated flavor. The 510 PEI drip tip can prevent juice spitting back.

Wismec Luxotic 100W Kit - Black Honeycomb $51.99 In Stock
The authentic Wismec Luxotic BF Kit consists of Luxotic BF Box Mod and Tobhino BF RDA.

Mod:
The Wismec Luxotic BF Box Mod, designed by JayBo, features its reimagined squonk system and inbuilt refillable e-liquid bottle of 7.5ml capacity. Powered by single 18650 battery (not included), Luxotic can reach maximum output to 100W. The large capacity squonk bottle allows you to vape with ease without refilling frequently. The cover panel is replaceable, making it different whenever you like.
RDA:
The Wismec Tobhino BF RDA is a 22mm atty that features open build place and adjustable side airflow. You can even build a fancy coil in this tiny RDA. It comes with decorative ring for not only decoration, but also heat insulation. With optional top cap, Tobhino is compatible with both 510 and 810 drip tips.

Tesla Punk Mini 85W TC Mod - Copper $44.99 In Stock
The authentic Tesla Punk Mini is the slim version of Punk 220W mod, which is powered by single 18650 battery (not included) and the maximum output is 85W. It is constructed from zinc alloy, ABS and PC, and it still comes with the same steampunk style PCB, which you can see through the transparent PC panel. The portable size and retro looking will catch everyone's eyes when you show off this to your friends.

YFTK Karma RDA Clone - Silver $17.99 In Stock
The YFTK Karma RDA Clone is constructed from 316 stainless steel in 18mm diameter. The build deck has dual post for single coil build. The air accesses the chamber via bottom airhole and travels up to the bottom of the coil. The top cap is made of Delrin.
The RDA comes with bottom feeder pin and decorative ring.

GeekVape Loop RDA - Gold Original Price $29.90,Now Only $20.99
The authentic GeekVape Loop RDA is the first leak-proof RDA with surround bottom airflow system. The innovative W style postless build deck is raised and provide more space for the juice well. Whats more, it will not cause juice leaking when refilling because of the deck and beveled airslots. The air accesses the internal via side airslots and hit the bottom of coils. The structure of the deck can surround the coils well and enhance the flavor.

This RDA comes with bottom feeder pin.

GAS Mods G.R.1 RDA - Black Original Price $39.99,Now Only $35.00
The authentic GAS Mods GR1 RDA is a 22mm atty that features single coil build deck, replaceable airflow control accessories and squonk-ready. The airflow control accessories comes with two different sizes of airholes, one is 2mm by 2mm each side, the other is 2mm by 5mm each side. The most recommended angle is 45 degrees, giving you the best flavor.

This RDA comes with bottom feeder pin.

Tesla CP Couples Kit - Gun Metal $58.99 In Stock
The authentic Tesla CP Couples 220W Kit consists of CP Couples Mod and dual CP Couples RDTAs.

The Tesla CP Couples 220W Kit is an updated version of Biturbo kit. It allows you to enjoy two kinds of flavor on one device at the same time, and the output wattage for dual RDTAs can be adjusted separately. Powered by dual 18650 batteries (not included), the mod can deliver power up to 110W (single RDTA) / 220W (dual RDTA). This kit will definitely gives great fun for cloud chasers.

Uwell Nunchaku 80W Starter Kit - Full Black $58.99 In Stock
The authentic Uwell Nunchaku Starter Kit consists of Uwell Nunchaku Mod and Nunchaku Tank.

Mod:
The authentic Uwell Nunchaku Mod, equipped with Uwell's new self-developed control panel, is a versatile tube mod as safe box mod. It is ergonomically designed and pocket-size for easy carry. Powered by a single 18650 battery (not included), Nunchaku is capable of outputting at between 5W and 80W. The mod comes with multiple modes to choose: power mode, TC mode (NI, SS) and bypass mode. Nunchaku should satisfy you with its stylish look and high performance.
Tank:
The authentic Uwell Nunchaku Tank is a 25mm sub ohm tank with large juice capacity up to 5ml. It adopts the unique flavor testing technology from UWELL, which perfects the flavor profile. It features large clouds with low wattage, power-saving and juice efficient. The coil is plug-pull style, which is easy to replace. Nunchaku Tank is compatible with Claptonized A1 0.25ohm coil (40~50W ) and 0.4ohm coil (45~55W).

SXK Armor 2.0 RDA - Silver $17.90 In Stock
The SXK Armor 2.0 RDA is constructed from 316 stainless steel and in 22mm diameter. It features dual-pole design and adjustable airflow. The RDA supports single and dual coil build with the insulated blocker. POM drip tip included.
This RDA comes with bottom feeder pin.

YFTK Karma RDA - Silver $17.99 In Stock
The YFTK Karma RDA is constructed from 316 stainless steel in 18mm diameter. The build deck has dual post for single coil build. The air accesses the chamber via bottom airhole and travels up to the bottom of the coil. The top cap is made of Delrin.
The RDA comes with bottom feeder pin and decorative ring.

Driptech-DS Mechanical Squonk Box Mod Clone - Black $20.69 In Stock
Please Note: Please use the coil over 0.2 ohm.

The Driptech-DS Goon Box Squonk Mod Clone features aluminum body with ergonomic design, which feels good in hands and is very lightweight. It comes with a 8ml silicone bottle for squonking. Powered by dual 18650 batteries (parallel, not included), this mod will provide raw power for massive clouds.

Please Note: The mod is in parallel connection

The logo / texts on the mod is engraved.

Steam Crave Aromamizer Titan RDTA - Black $56.99 In Stock
The Authentic Steam Crave Aromamizer Titan RDTA is so amazing as it has 41mm diameter and maximum 28ml capacity! The Innovative Lego modular build deck allows you to build coils on postless, Velocity, or Series style deck, which offers vapers a great change to build various configurations. The tank can be switched from 28ml to 18ml, or you can use it as RDA, which has a 4.5ml juice well. Titan will bring you great fun for endless coil building and fantastic vaping experience.

GeekVape Loop RDA - Silver $28.90 In Stock
The GeekVape Loop RDA is the first leak-proof RDA with surround bottom airflow system. The innovative W style postless build deck is raised and provide more space for the juice well. Whats more, it will not cause juice leaking when refilling because of the deck and beveled airslots. The air accesses the internal via side airslots and hit the bottom of coils. The structure of the deck can surround the coils well and enhance the flavor.

This RDA comes with bottom feeder pin.

Digiflavor Themis RTA Mesh Version - Silver $41.90 In Stock
Inspired by GeekVape Zeus, the authentic Digiflavor Themis RTA is a leak-proof RTA with innovative airflow transferring from top to bottom providing outstanding flavor. Themis is available with two versions: Dual Coil Version and Mesh Version. The quick access top cap makes refilling easy. The tank is capable of holding 5ml e-juice.

This one is Mesh Version, with build deck for mesh wires.

Tesla CP Couples 220W Kit - Gun Metal $58.99 In Stock
The authentic Tesla CP Couples 220W Kit consists of CP Couples Mod and dual CP Couples RDTAs.

The Tesla CP Couples 220W Kit is an updated version of Biturbo kit. It allows you to enjoy two kinds of flavor on one device at the same time, and the output wattage for dual RDTAs can be adjusted separately. Powered by dual 18650 batteries (not included), the mod can deliver power up to 110W (single RDTA) / 220W (dual RDTA). This kit will definitely gives great fun for cloud chasers.

Kindbright Flave RTA - Silver $14.99 In Stock
The Kindbright Flave RTA is constructed from 316 stainless steel in 24mm diameter. It features dual post deck for single coil and middle side adjustable airflow. The deck has notches for easy installation of the coil. The tank is large and allows to take about 30 puffs per drip.
This RTA comes with bottom feeder pin.

ESPION Infinite 230W TC Mod - Black $57.69 In Stock
The Joyetech ESPION Infinite Mod has a set of tunnel light effects, it even reacts to each action you made. You can easily manage it with an intuitive 0.96inch color display. The ESPION Infinite is powered by dual 21700 batteries, but still works with normal 18650 as well (batteries not incldued), reaching a formidable 230W output and supporting 2A quick charge.

SXK NarDA RDA Clone - Silver $15.00 In Stock
The SXK NarDA RDA Clone is a rebuildable dripping atomizer with 22mm diameter. It is made out of 316 stainless steel. Coming with dual-post design, it is easy to build. SXK NarDA style RDA is a nice single coil RDA that will provide intense flavor and massive cloud. 510 POM drip tip is included.
This RDA comes with bottom feeder pin.

Vandy Vape Berserker MTL RDA - Silver $35.90 In Stock
The Authentic VandyVape Vandy Vape Berserker MTL RDA is an affordable high-end MTL RDA. It is 18mm in diameter. The deck comes with dual post for single coil build. The amazing thing is that Berserker MTL RDA has 6 different types of airflow accessories, which are replaceable and will bring you different flavor. The air enters from the side slots and finally blows the bottom of coil. What's more, the cap has 6 sizes of airholes, meaning there are lots of airflow configurations. Berserker MTL RDA comes with a 22mm and a 24mm beauty ring to fit different mods.
This RDA comes with bottom feeder pin.