EHPRO Cold Steel 200W TC Mod &Ennequadro Imo 650 Style Mod

2Fdeal - это профессиональный интернет-магазин, в основном, для электронных сигарет, базирующийся в Китае.
Аватара пользователя

Автор темы
Сообщения: 964
Зарегистрирован: 28 июн 2018, 13:42
Репутация: 0

EHPRO Cold Steel 200W TC Mod &Ennequadro Imo 650 Style Mod

Сообщение Doris_2Fdeal » 29 июн 2019, 06:20 #1

$60.99 Authentic EHPRO Cold Steel 200 200W TC VV VW APV Box Mod (Regular Version) 18650
Coupon Code: MAPCOLD200
510 threading connection
Coil resistance range: 0.05-3ohm
Voltage range: 0.5-8V
Wattage range: 5-200W
Output current: 40A
Temperature range: 100'C-315'C / 200'F-600'F
Made with fine stainless steel and craftsmanship, every Cold Steel 200 is a piece of art
Craftsmanship to ensure durability and reliability
Pop-up battery cover: unique and easy to replace the batteries.
Type-C USB port: Cold Steel 200 mod can be charged or upgraded firmware via type-C USB port quickly.
The max charging current of Cold Steel 200 is 2.0A
Multiple modes for different style vapers: you can choose power mode (PC), temperature mode, power curve, voltage mode (VC), or bypass mode as you like.
Multiple protections:
Short-circuit protection
Over heat protection
Over current protection
Weak battery protection
Reverse battery protection
10s cut-off protection
Low voltage protection
Support balance charge with different brand battery
Powered by dual 18650 batteries (batteries sold separately)

$18.99 Ennequadro Imo 650 Style 18650 Hybrid Mechanical Mod 22mm
22mm diameter
The smallest 18650 tube
Brass material
Only 70mm high
Rhodium brushed finish
Side fire
Interchangeable insulators

Cost Effective Pre-built Coils $2.69 BMTD Coils

$34.9 Authentic Cool Vapor STAN 200W VW Variable Wattage Box Mod
Material: Zinc alloy + PC
Input voltage: 6.6~8.4V
Battery: 2 x 18650 batteries not included)
Power range: 5~200W
Voltage output range: 1V~8.0V
Quiescent current: below 50uA
Operating modes: 1. Power mode; 2. Voltage mode; 3. Mechanical mode
Resistance range of atomizer: 0.1~3 ohm
Display: 0.96 color screen with a black frame to avoid light-leaking
1. Functions of Keys
A. Press the "POWER" key for 5 consecutive times to power on or power off. The interface "COOLVAPOR" appears upon powering on; and the green light flashes for 3 times. "CHIPS BY SEVO" appears upon powering off.
B. Press the "POWER" key for 3 consecutive times to switch among power mode (to set the output power), voltage regulation mode and mechanical smoke mode.
C. Long press the "POWER" key to suck the smoke away; the white light flashes; the maximum heating time is 10s, after which the heating is stopped automatically with a prompt "Over time 10S".
D. Simultaneously press "+" and "-" to lock or unlock the keys. "KEY LOCK" appears when the keys are locked and "KEY UNLOCK" when they are unlocked. In case of any key operation when keys are locked, "Please Unlock" appears to prompt to unlock.
E. Press "POWER" and "-" to set the number of smoke suction port by pressing + or - when the number flashes. Short press the ignition key to confirm. If the number is 0, the number of ports is not limited. "Puff Limit" appears to prompt the excess of the number set.
F. Red light and red font on the display screen indicate abnormalities.
2. Intelligent Protection Functions and Prompts
A. Load short-circuit protection Shorted
B. Low load resistance protection: Low Resistance
C. High load resistance protection: High Resistance
D. Overtemperature protection: "Too Hot!" appears when the internal temperature of the circuit is too high; in such case, wait several seconds to let temperature go down before continuing to use.
E. Battery reverse connection protection: Battery reverse connection does no harm to the product, but it cannot be powered on.
F. Low battery voltage protection:
When the battery voltage is below 6.6V, no discharge operation is allowed. In such case, "Please Charge" is displayed when pressing the POWER key.
G. High battery voltage protection: When the battery voltage is detected to be
higher than 8.4V, it is deemed as abnormal power supply. In such case, "High Voltage" is displayed when pressing the POWER key.
In case of poor battery performance or long-time high-power continuous discharge, the battery voltage will be too low. "Weak Battery" appears to stop discharge at this moment.
2Fdeal is a professional online store mainly for e-cigarette products based in China. We are integrated seamlessly with the ecig manufacturing center and running both German warehouse and China warehouse.


Вернуться в «2FDeal»

Кто сейчас на конференции

Сейчас этот форум просматривают: нет зарегистрированных пользователей и 5 гостей